Geprc Mark4 4K 224mm Span F7 4S 5 Inch FPV Racing Drone PNP BNF w/ Caddx Tarsier 4K V2 Camera
Geprc Mark4 4K 224mm Span F7 4S 5 Inch FPV Racing Drone PNP BNF w/ Caddx Tarsier 4K V2 Camera
Brand Name: Geprc
Model: Mark4 4K
Item Name: 224mm Span F7 4S 5 Inch FPV Racing Drone
Weight:381g ( without battery )
Package Included:
1x Geprc Mark4 4K 224mm 4S FPV Racing Drone
Overview:
MARK4 4K is a FPV Quadcopter with high configuration.
It is equipped with 4K Tarsier V2 Camera of Caddx, and the highest 4K 30fps recording.
The flight controller use SPAN-F722-VTX, dual gyroscope ICM20689(SPI) working on the same time.
Power with the use of the new design 2306.5 motor, and the new G5*4.3*3 Freestyle propeller,
the overall power control sense is stronger, more powerful.
It is equipped with 4K Tarsier V2 Camera of Caddx, and the highest 4K 30fps recording.
The flight controller use SPAN-F722-VTX, dual gyroscope ICM20689(SPI) working on the same time.
Power with the use of the new design 2306.5 motor, and the new G5*4.3*3 Freestyle propeller,
the overall power control sense is stronger, more powerful.
The Mark4 4K frame has been improved, No Propeller in view,no jelly. resulting in a clean picture.
The product includes Mark4 4K 3D printed parts and spare parts.
Specification:The product includes Mark4 4K 3D printed parts and spare parts.
Brand Name: Geprc
Model: Mark4 4K
Item Name: 224mm Span F7 4S 5 Inch FPV Racing Drone
Weight:381g ( without battery )
| Mark4 4K Frame Kit ( Improved Version) | Material: Full 3K Carbon Fiber Wheelbase: 224mm Size:138*176mm Mounting Holes: 30.5*30.5mm/20*20mm Arms Plate Thickness: 5mm Side Plate Thickness: 2.5mm Top Plate Thickness: 2.5mm Bottom Plate Thickness: 2.5mm Protect Plate Thickness: 2mm |
| SPAN F7 Dual Gyro Flight Controller AIO VTX ( F722-VTX Stack ) | MCU: STM32F722RET6 IMU: 2x ICM20689(SPI) BlackBox: 32Mb onboard Flash OSD: BetaFlight OSD w/ AT7456E chip Baro: BMP280 BEC Output: 5V@2A Integrated LC Filter Firmware target: EXF722DUAL Size:36x36mm board, φ4mm with Grommets φ3mm |
| Onboard 5.8G 48CH 600mW VTX | Channel: 48CH Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 600mW Connector type: MMCX Connector Traditional button IRC Tramp protocol |
| 50A BLheli_32 4in1 ESC ( F722-VTX Stack ) | MCU: STM32FO51K86(32bit 48mHz) Continuous Current: 50A Peak Current: 55A (5S) Current sensor: YES Telemetry: Supported Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot Firmware Version: GEPRC-BL32-4IN1 Input Voltage: 3-6S Lipo |
| Geprc G5x4.3x3 5043 3-Blade Propeller | Brand Name: Geprc Item Name: 5043 3-Blade Propeller Color: Transparent Blue Quantity: 2 CW & 2 CCW |
| Geprc GR2306.5 2450KV 4S Motor | Configuration: 12N14P Stator Diamter: 23mm Stator Length: 6.5mm Shaft Diameter: 4mm Motor (Dimension: Φ28.2*29.2mm (Dia.*Len)) Wire AWG: 20AWG Weight(g):31g (not include wire) |
| Caddx TARSIER 4K V2 FPV Camera | FOV: 4K F2.8, FOV150°16/9), FPV FOV165°(4/3) Lens: DUAL Lens F2.8/12Mega Audio: DUAL DIGATIL MIC CPU: Dual core dual system Sensor: 12M sensor,1/1.8INCH 1/2.9INCH Main Resolution: 4K/30fps 16:9 2.7K/60fps 4:3 1440P 60fps/30fps 4:3 1080p/90fps,60fps,30fps 16:9 720P120fps 16:9 CAMERA Bitrate : 50kbps/66kbps Video System: NTSC/PAL ISO:OFF/100/200/400/800/1600 ANTI-SHAKE:Hardware anti-shake Scene Mode: Auto/Personage/Scenery/Defog Dimension CAMERA: 19x20mm / DVR:29x29mm(HOLE:20x20mm) Weight : 18g |
| Optional Receiver | PNP Version: Without Receiver Frsky XM+ Receiver/ Frsky R-XSR Receiver/ Flysky A8S V2 RX / TBS Nano SE RX |
| Lipo Battery ( NOT Included) | Recommend 6S 1050mAh-1300mAh Lipo Battery |
Package Included:
1x Geprc Mark4 4K 224mm 4S FPV Racing Drone
